Monday, October 8, 2007

Mold Prevention Tips

The key to mold control is moisture control. Solve moisture problems before they become mold problems!

  • Fix leaky plumbing and leaks in the building envelope as soon as possible.
  • Watch for condensation and wet spots. Fix source(s) of moisture problem(s) as soon as possible.
  • Prevent moisture due to condensation by increasing surface temperature or reducing the moisture level in air (humidity). To increase surface temperature, insulate or increase air circulation. To reduce the moisture level in the air, repair leaks, increase ventilation (if outside air is cold and dry), or dehumidify (if outdoor air is warm and humid).
  • Keep heating, ventilation, and air conditioning (HVAC) drip pans clean, flowing properly, and unobstructed.
  • Vent moisture - generating appliances, such as dryers, to the outside where possible.
  • Maintain low indoor humidity, below 60% relative humidity (RH), ideally 30-50%, if possible.
  • Perform regular building / HVAC inspections and maintenance as scheduled.
  • Clean and dry wet or damp spots within 48 hours.
  • Don't let foundations stay wet. Provide drainage and slope the ground away from the foundation.

Reference: EPA 402-K-01-001 March 2001, Page 3. Mold Prevention Tips - Mold Remediation in Schools and Commercial Buildings.

This document is available as a text-searchable HTML document on EPA's web server at: www.epa.gov/iaq/molds

2 comments:

MB said...

Wonderful article to prevent molds and mildew! Well, I got one of the top rated dehumidifier in the market and I can say that it is really one of the best and most effective way to prevent and remove moisture in the air that produces the molds! And I recommend this as well to my friends.

Unknown said...

Very cool article.
Rancho San Diego air conditioning
heating in san diego